Parallel Parking Practice for the Road Test
Practise parallel parking in your browser and get scored on the steps the Ontario G2 road test checks: mirrors, signal, blind spots, distance from the curb and pulling out.
Hi, I’m your examiner. Drive down the street and parallel park in the space between the blue car and the white car on your right.
How to do it
- Mirror, signal right, then slow down.
- Stop beside the blue car, about a metre away, with your rear bumper in line with its rear bumper.
- Shift to R, check mirrors and both shoulders, then reverse with the wheel turned fully right.
- When you can see the blue car’s rear corner, straighten the wheel; then turn fully left to swing in.
- Shift to P and set the parking brake. To leave: signal left, check mirror and left shoulder, then go.
Keyboard
- ↑
- Gas
- ↓
- Brake
- ←→
- Turn the wheel (it stays where you leave it)
- X
- Centre the wheel
- DRP
- Drive, reverse, park
- QE
- Left / right signal
- M
- Check mirrors
- ZC
- Look over left / right shoulder
- B
- Parking brake
- V
- Top view
Sources
How scoring works
Each step of the handbook's parallel park task (approach, park, resume) is a scored item. Distances the handbook gives are used as written: stop beside the parked car with at least 60 cm between you, then reverse in without touching the curb or another vehicle. Finishing within 30 cm of the curb and within 6 degrees of parallel are practice standards we chose, not handbook figures. The handbook says to look for a space about one and a half times your car's length. The tight setting uses that size; standard and roomy give you a little more space.
Disclaimer
Practice only. The score is not an official road test result and the simulation is simplified. Study the Official MTO Driver's Handbook and practise in a real vehicle with a qualified driver.
Was this tool helpful?